Rotary multitool 160W - 226 acc. POWX1326

This rotary multitool is a highly versatile tool that is always handy to have around. Depending on the accessory attached, you can use it to take on a wide variety of projects. To help you get started, this multitool comes with no less than 226 accessories, a telescopic stand and a table clamp.

What can you do with this rotary multitool?

The amount of DIY projects you can do with this versatile rotary tool is impressive. Choose between 226 interchangeable accessories for drilling, cutting, grinding, sanding and buffing. The 226 accessories are neatly stored in a practical storage case, so you don’t waste time looking for the right attachment.

Its strong points:

Variable rotational speed: The rotating multitool has variable rotational speed settings ranging from 8000 min-1 to 35000 min-1. Depending on the project, you can adjust the speed settings. A low rotational speed, for example, is ideal when working with soft materials like plastic.

Flexible shaft:  Its flexible shaft allows you to work comfortably and with precision in small, hard-to-reach spots.

Spindle lock: Switching between accessories is easy thanks to the spindle lock.

User comfort: Thanks to the telescopic stand with table clamp the lightweight rotary tool can be mounted easily onto your work bench for added comfort.

Soft grip: The soft material of the soft grip handle provides added grip and user comfort, so you can work comfortably with this rotary multitool even for longer periods of time.

Tips & Tricks:

• Don’t wear your hair down and don’t wear clothes that are too loose. They can get tangled in the tool and cause serious injuries.
• Let the tool come to a complete standstill before putting it down. A minor rotation can damage the surface of, for example, your worktable.

Its key technical specifications:

• Nominal power: 160 W
• Rotational speed: 8000 min-1 – 35000 min-1
• Diameter collet: 3.2 mm
• Cable length: 1.8 m

What is included?

• 1x rotary multitool
• 4x sanding sleeve - Ø 13mm
• 8x sanding sleeve - Ø 6mm
• 1x collet - 1.6mm
• 1x collet - 2.3mm
• 2x collet - 3.2mm
• 3x wire brush brass
• 1x wire brush steel
• 3x wire brush nylon
• 1x polishing compound
• 3x mandrel for cutting disc
• 1x mandrel for polishing felt
• 2x mandrel for sanding sleeve
• 1x polishing felt - pointed
• 1x polishing felt - Ø 25mm
• 4x polishing felt - Ø 13mm
• 1x polishing cotton - Ø 25mm
• 12x grinding wheel
• 10x grinding stone
• 6x drill bit
• 1x flap wheel
• 72x sanding disc
• 80x sanding disc
• 1x dressing stone
• 1x combination tool
• 1x hex key
• 1x flexible shaft
• 1x telescopic stand
• 7x carving bit
• 1x rubber emery wheel
• 71x cutting disc
• 1x L-shape pin
• 1x manual