Heat gun 2000W - 3 acc. POWX1015

A heat gun speeds up the tedious part of refurbishing projects. Want to give your cupboard a new look, but need to get that old layer of paint off first? Use this hot air gun to get the job done in no time. This Powerplus heat gun guarantees optimal heat dissipation and is ideal for removing glue and paint.

The heat gun comes with 3 # nozzles, so you can get to work immediately.

What can you do with this heat gun?

Choose between 2 temperature settings, so you can optimize the temperature for specific uses. Use the lowest setting at 350 °C to quickly dry damp wood or paint, remove stickers, thaw frozen pipes or use it to wax your skis. The higher setting goes up to 600 °C and can be used to bend plastic pipes, loosen nuts and bolts, and to easily remove paint.

Its strong points:

Lightweight: At just 640 g, this tool is a lightweight, allowing you to work comfortably, even for longer periods of time.

Short warm-up time: In just 60 sec the hot air gun is fully warmed up and ready to use. You'll lose no time and can get straight to work.

Lock-on button: The lock-on button prevents hand fatigue and ensures you don’t have to hold down any buttons, so you can work without interruption.

Accessories: The 3 # included nozzles provide even more control over the dispersion of heat. There’s a reduction nozzle to concentrate the heat, a spreader nozzle which spreads the heat and one glass protection nozzle.

Hands-free use: This heat gun can also be used in a stationary position, so you can work hands-free. This allows you to use both hands for precision work like shrinking heat shrink tubing, without having to hold the tool.

Tips & Tricks:

• A heat gun doesn’t use an open flame, but the heat still poses a fire risk. Make sure there are no highly flammable items near when using the heat gun.
• Don’t touch the metal nozzle. It becomes very hot during use and remains that way up until around 30 minutes after use.

Its key technical specifications:

• Rated power:
• Number of heat settings: 2
• Min. work temperature: 350 °C
• Max. work temperature: 600 °C
• Warm-up time: 60 sec
• Power cable length: 1.8 m

What is included?

• 1x heat gun
• 1x glass protection nozzle
• 1x reduction nozzle
• 1x reflector nozzle
• 1x manual